LED Indication for Cable Modem
|
|
Modem Offline - Can't connect with SHAW CABLE
POWER - Solid / Green
RECEIVE - Flashing / Green
SEND - Off
ONLINE - Off
ACTIVITY - Soild / Green
|
|
POWER |
RECEIVE |
SEND |
ONLINE |
ACTIVITY |
|
Boot-up |
ON |
ON |
ON |
ON |
ON |
Power on 0.25sec |
X |
FLASH |
FLASH |
FLASH |
X |
System initialization |
DOCSIS
Star-up |
ON |
FLASH |
OFF |
OFF |
X |
RECEIVE Scanning and acquiring SYNC |
ON |
ON |
FLASH |
OFF |
X |
SYNC Completed, receiving UCD to ranging completed |
ON |
ON |
ON |
ON |
ON |
DHCP, configuration file download, registration & initilization
DHCP status - LED ON 1 sec, & OFF 1 sec.
TFTP status - LED ON 0.25sec, & OFF 0.25 sec. |
ON |
ON |
ON |
ON |
X |
Operational (NACO=ON) |
ON |
FLASH |
FLASH |
OFF |
OX |
Operational (NACO=OFF) |
Channel
Bonding
Operation |
FLASH |
FLASH |
FLASH |
FLASH |
FLASH |
Waiting registration, from up to down all FLASHING |
X |
X |
X |
X |
OFF |
From 1 to 4 REVEIVE 1to 4 LEDs are ON
From 5 to 8 REVEIVE 1to 4 LEDs are FLASHING |
OFF |
X |
X |
X |
X |
From 1 to 4 SEND 1to 4 LEDs are ON |
FLASH |
FLASH |
FLASH |
FLASH |
FLASH |
Waiting registration, from up to down all FLASHING |
CPE
Operation |
X |
X |
X |
X |
OFF
|
No Ethernet Link |
X |
X |
X |
X |
ON |
Ethernet Link |
X |
X |
X |
X |
FLASH |
TX / RX Ethernet Traffic |
SW
Download Operation |
ON |
FLASH |
FLASH |
ON |
X |
A software download and wihile updating the FLASH memory |
|
Supported Modem |
Thomson DCM 475 |
Up to 20M |
|
Huawei - MT130U |
Up to 60M |
Motorola SB5100 |
Up to 20M |
|
Hiltron Technologies - CGN |
Up to 60M |
Motorola SB5101 |
Up to 20M |
|
Hiltron CDA Res |
Up to 60M |
Motorola SB5102* |
Up to 20M |
|
Technicolor TC4300* |
Up to 75M |
Motorola SB5120 |
Up to 20M |
|
Technicolor TC4350* |
Up to 150M |
Motorola SB6120 |
Up to 20M |
|
Hiltron CDA3 - 20* |
Up to 150M |
We offer 3 differnt modems - SB5102, TC4300, TC4350, CDA3 –20 |
|
Technicolor TC4300 |
Latest High-Bandwidth Technology
The TC4300 is a DOCSIS 3.0 cable gateway introducing the next generation in high-speed data services. This new cable solution offers next to four bonded upstream channels, 8 bonded downstream channels for wired download speeds of up to 340 Mbps. Operators can now offer their customers even faster broadband access as well as demanding IPTV services.
TECHNICAL NOTE – THE TC4300 CANNOT BE USED ON THE ROGERS or SHAW NETWORK ON CONNECTION SPEEDS OF 100MB AND ABOVE
Full Band Capture Solution
Thanks to its fully integrated 1 GHz wideband tuner, the TC4300 exceeds SCTE-40+ performance and eliminates all frequency limitations of traditional wideband tuners. The TC4300 enables use of the full Radio Frequency (RF) spectrum without the need for grouped channels. This helps the operator migrate its entire DOCSIS 3.0 install base from one to eight DOCSIS downstream channels without having to re-align all its broadband channels to accommodate this new service. |
|
Features |
- DOCSIS® 3.0 compliant
- Backward compatible with DOCSIS® 2.0 (and older)
- 4 bonded upstream and 8 bonded downstream channels
- Full band capture tuner
- Built in RF spectrum analyzer
- 1 GE LAN port
- MPEG2 over IP encapsulation solution
- MoCA immunity in a MoCA capable environment
- IPv4, and IPv6 DS-Lite support
- Designed to meet the latest ECO standards
- Maximum upstream data range 108 Mbps (theoretical) (27 Mbps x 4 channels)
|
Hiltron CDA3 - 20 |
CDA3
TThe CDA3 is the perfect choice for cable operators who want to offer high-speed broadband access to their customer base economically. It delivers speeds of up to 960Mbps (24×8) with twenty-four bonded downstream channels over its DOCSIS interface. The CDA3 allows MSOs to offer their customers various broadband applications such as telecommuting, HD and UHD video on demand over IP connectivity to small office/home office (SOHO), high-speed residential Internet access, interactive multimedia services, etc. The CDA3 is an intelligent device that enhances its basic data transmission features with IPv6 support. This makes it especially suitable for the transmission of data based on this protocol.
Installation of the CDA3 is quick, straight-forward, and can even be carried out by the end-user. Once connected, the built-in TFTP client automatically gets the IP address and configuration data from the network server without human intervention. A browser-based utility allows convenient viewing of key network statistics, and SNMP support provides total remote control over the device. |
|
Features |
- DOCSIS 3.0 compliant"
- 24x8 channel bonding"
- Full-featured, high bandwidth, cable modem"
- Extensive operator control via configuration file and SNMP"
- Well-defined LEDs clearly display device and network status"
- RJ-45 Ethernet port 10/100/1000 Mbps (Auto-MDI/MDIX)
- Data rate up to 320 Mbps with 8 upstream channel bonding
|
|